Coat-It product image
2.0 lb Kit | 8.0 lb Kit

Check out other GOOP epoxies:

SuperMEND product image     SuperMEND®

marinefixfast product image     Marine

superweld product image     Automotive

Anti-Skid product image     All Purpose


Two-Part Epoxy —
With Kevlar® for Added Endurance

COAT-IT is a black epoxy sealer and coating that contains ceramic beads which provide extreme abrasion resistance. It also contains Kevlar® for toughness and graphite for lubricity. COAT-IT provides an armor type high-build coating that is sandable, paintable and waterproof! COAT-IT also works well as a sealer that fills and seals hard-to-find leaks and cracks in aluminum, wood, fiberglass, steel and ferrocement. Available in 2-pound and 8-pound kits.
  • Abrasion Resistance:   Very High.
  • Lubricity:   Exhibits high lubricity in marine application and will slide over rocky or abrasive surfaces.
  • Ease of Application:   Easy. Mixes directly in can. Just mix together and apply.
  • Waterproof:   Yes. Unique epoxy sealers.
  • Adhesion:   Excellent. Flake-resistant.
  • Substrates:   Aluminum, Wood, Fiberglass, Steel, Ferrocement.


Fill, seal, repair boat bottoms, decks/steps/ramps, RV roofs, hatches and hulls.

2.0 lb Kit 20.0 sq ft*
8.0 lb Kit 80.0 sq ft*
*depending upon the porosity of the surface and thickness applied.

Find out more:
How to use Coat-It
Frequently Asked Questions (FAQs)
Technical Data Sheet (TDS)
Coat-It® MSDS (Resin & Hardener) — EN

©2014 Eclectic Products, Inc. - Eugene OR
home | about | msds | tds | literature | craft projects | articles | videos | photo gallery | contact us | site map